Kichler 10567 Manual do Utilizador descarregar pdf

1. Turn off power.

NOTE: All installations should comply with local

electrical codes. If you have any doubts concerning

installation contact a qualiﬁ ed licensed electrician.

2. On one side of wire module there are two gates.

Feed approximately 5 inches of Type NM non-

metal sheathed cable (12 gauge maximum)

through gate.

NOTE: These gates serve as strain reliefs

holding cable securely in place. Gates should not

be removed and no more then one cable should

go through each.

3. Peel back jacket on cable to within one inch of

inside of gate.

4. Strip approximately 1/2 inch of insulation off each

black and white wire.

NOTE: On inside of wire module cover is a gauge

to assist in stripping the correct amount of

insulation.

5. Push stripped wires into the appropriate connector:

black to black

white to white

bare wire to green

Slightly tug on each wire to insure connection has

been made and is secure.

6. Push wire module to mounting surface of cabinet

(as close to wall as possible) allowing excess

cable to feed back into wall. Secure wire module

in place using provided screws. It may be necessary

to drill 1/16” maximum pilot holes.

7. Push wires and connectors inside wire module.

We suggest pushing each connector towards a

different corner of wire module.

8. Slip legs on wire module cover into slots inside

wire module and until cover snaps in place.

NOTE: To remove cover, slide screwdriver into

slot formed by cover and wire module then pull

screwdriver handle away from wire module until

cover separates from wire module.

gate

cable

slot

wire module cover

slot

gauge

white/white

black/black

bare wire/green

connectors

IS-10566-US

1 2

11. 14. 16 2

Resumo do Conteúdo

Página 1

1. Turn off power. NOTE: All installations should comply with local electrical codes. If you have any doubts concerning installation contact

Página 2 - 11. 14. 16

9. Determine desired location for mounting ﬁ xture. Mounting surface should be a minimum of 1/2” thick and approximately 2 1/2” clearance for

Modelos relacionados 10568 | 10566 |

Comentários a estes Manuais

Sem comentários

Kichler 10567 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Kichler 10567. Kichler 10567 User Manual Manual do Utilizador

Resumo do Conteúdo

Modelos relacionados 10568 | 10566 |

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Kichler 10567